Install The Logs - Heatilator ICON60IT Owner's Manual

F. Install the Logs
• Base logs are pre-installed.
• Place three top logs:
Place slot in bottom of top log over pin in top of base log.
Align opposite end of log with white notched area in top
of base log. Repeat for each top log. See Figures 12.1
through 12.6.
Figure 12.1 Placing First Top Log - ICON60I
Figure 12.2 Placing Second Top Log - ICON60I
Figure 12.3 Placing Third Top Log ICON60I
36 Heatilator • ICON DV • 4042-300 Rev R • 06/07
Figure 12.4 Placing First Top Log - ICON100I
Figure 12.5 Placing Second Top Log - ICON100I
Figure 12.6 Placing Third Top Log - ICON100I