Draytek Vigor3900 User Manual page 93

Cancel

If you choose DHCP as IPv4 protocol type, click the DHCP Tab to open the
following page:
Available parameters are listed as follows:
Item
Host Name
(Optional)
IP Alias
MTU/MRU
Connection
Detection Mode
Vigor3900 Series User's Guide
Click it to exit the dialog without saving the configuration.
Description
Type a name as the host name for identification.
Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection/DMZ Host).
Add – To add a new IP address, click Add. Type the IP
address and use the drop down list to specify the subnet
mask. Next, click Save. The new one will be added and
displayed on the field under the box.
Save – click this button to save the setting.
– click the icon to remove the selected entry.
It means Max Transmit Unit for packet. The default setting
is 1500.
Select a detecting mode for this WAN interface. There are
three ways ARP, PING and HTTP supported in Vigor
85