Draytek Vigor3900 User Manual page 171

Multi-wan security appliance

Hide thumbs Also See for Draytek Vigor3900:

Table of Contents

In the following page, type a name for such profile; check Enable; choose Subnet as

Destination Type; type 203.65.1.35 as IP address; choose Load Balance Pool as

Out-going Rule; choose WAN1 as the Load Balance Rule; click Disable for Failover

to Next Rule.

After finished the above settings, click Apply to save the configuration.

Now, any packets from LAN1 sent to the remote PC (IP address: 203.65.1.35) will be

forcefully to pass through WAN1.

Vigor3900 Series User's Guide

Troubleshooting