Draytek Vigor3900 User Manual page 404

Available parameters are listed as follows:
Item
Profile
Enable
Max Sessions
general target
source target
Apply
Cancel
4. Enter all the settings and click Apply.
5. A session limit profile has been created.
Description
Type the name of the profile.
Check this box to enable such profile.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index. This
field cannot be typed with "0", otherwise the profile cannot
be saved.
Time Object - Click the triangle icon
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
new time object profile.
Time Group - Click the triangle icon
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
new time group profile.
Source IP Object - Click the triangle icon
profile selection box. Choose one or more IP object profiles
from the drop down list. The selected profile will be treated
as source target. You can click
object profile.
Source IP Group - Click the triangle icon
profile selection box. Choose one or more IP group profiles
from the drop down list. The selected profile will be treated
as source target. You can click
group profile.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
396
to display the
to create another
to display the
to create another
to display the
to create another new IP
to display the
to create another new IP
Vigor3900 Series User's Guide