Draytek Vigor3900 User Manual page 420

4 . 1 5 . 4 . 2 S y s l o g A c
4 . 1 5 . 4 . 2 S y s l o g A c
Available parameters are listed as follows:
Item
Status
Log to USB
Server IP
Server Port
Router Name
Firewall Log
VPN Log
User Access Log
WAN Log
c e s s S e t u p
c e s s S e t u p
Description
Choose one of the selections to determine current status for
Syslog access. If you choose Local as Status, you don't need
to type any server IP and port. Just give a name for the
router.
Enable – Click it to save the log onto USB disk.
Disable – Click it to disable the function of log to USB.
USB Syslog Keep Days – Type the days that USB disk will
keep the log without deleting.
Type the IP address of the Syslog server.
It is available when Remote or Both is selected as Status.
Type the port number for the Syslog server.
It is available when Remote or Both is selected as Status.
Type the name of the router. The default name is Vigor.
Click Enable to make the firewall log recorded in the
Syslog.
Click Enable to make the VPN log recorded in the Syslog.
Click Enable to make the user access log recorded in the
Syslog.
Click Enable to make the WAN log recorded in the Syslog.
412
Vigor3900 Series User's Guide