Draytek Vigor3900 User Manual page 201

2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item
Group
Enable
Comment
Apply
Cancel
4. Enter all of the settings and click Apply.
5. A new filter group has been added.
6. You can create filter rule by clicking
profile. A setting page will appear for you to add new IP filter rule profile.
Vigor3900 Series User's Guide
Description
Type the name of the IP filter group.
Check the box to enable this profile.
Give a brief description for the profile.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
on the left side of the selected IP filter group
193