Selecting The Original Output Direction - Oki lp-1030-mf User Manual

Selecting the Original Output Direction

In this Printer, either front or rear output is available for the original. Select on this
screen the output direction for the original.
Note
Output from the front is limited to originals up to 1219.2 mm (48 inches) in
‹
length.
The Printer can output the original either to the front or the rear. When
‹
outputting from the front, to prevent the original from being damaged,
keep the original width guide out of the way at both ends.
LP-1030-MF User's Manual for Multifunction Printer Operation
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
39