Oki lp-1030-mf User Manual page 116

Chapter
1
Q.
Chapter
2
Chapter
3
Q.
Chapter
4
Chapter Q.
5
Chapter
6
Q.
116
LP-1030-MF User's Manual for Multifunction Printer Operation
Thin or broken lines or dots appear on the printout's background part.
A.
The Background Compensation setting is too low.
Increase the Background Compensation setting
A.
The Sharpness setting is too high.
Lower the Sharpness level
The printout shows Moire.
A.
When the image is processed, regular halftone dots and lines overlap and
generate moire.
Try changing the loading direction of the original.
Lower the Sharpness level
Try changing Original Type to Text/Photo
A blueprint original is copied or scanned overall with extremely high
density.
A.
The image quality setting for the blueprint original is slightly higher.
Increase the Background Compensation setting
A blueprint original is copied or scanned overall with extremely low
density.
A.
The image quality setting for the blueprint original is slightly lower than
required.
Decrease the Density setting.
( & page 42
( & page 44 ).
( & page 44 ).
( & page 31
( & page 32 ).
).
).
( & page 42 ).