Loading The Original - Oki lp-1030-mf User Manual

Loading the Original

Chapter
1
‹ Loading the Original
Chapter
2
1
Chapter
3
Chapter
4
Chapter
5
Chapter
6
22
LP-1030-MF User's Manual for Multifunction Printer Operation
This section describes how to load the original.
TIP
‘ Alignment area differs depending on the size standard as follows.
Align the right original width guide for A series originals
Align the right original width guide for originals with
size standards in mm
Align the right original width guide for originals with size standards in inch,
and with 610 mm (24.02 inches) and 914 mm (35.98 inches)
Adjust the position of the original
width guide.
Slide the right and left original width guides
so that they are aligned with the size line
appropriate for the original size.
Slide the guide so that the desired A
series size is shown in this window.
For the left original width guide:
Slide the guide so that the desired A
series size is shown in this window.
For the right original width guide:
Align the center bar's left edge with
the size line.
For the left original width guide:
Align the center bar's right edge with
the size line.
Center bar
For the right original width guide:
Align the center bar's left edge with
the size line.
For the left original width guide:
Align the center bar's right edge with
the size line.