Selecting the Original Size Standard
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
38
LP-1030-MF User's Manual for Multifunction Printer Operation
Select the size standard applied to the original.
Note
This menu shows only size standards with Available Size Standards set to
On in the System menu. (For more details, see the separate
for Basic Printer
Make sure this setting matches the original to be loaded.
To load a user defined series original, specify the size at User Defined Size
in the System menu. (For more details, see the separate
Basic Printer
Operation.)
With Original Size Setting set to Auto, the Printer automatically identifies
the originals of several size standards.
However, the scan operation time is slightly longer, as the Printer prescans
the edge of the original to identify its width.
When you intend to print on the paper of only one size standard, you
are recommended to set Original Size Setting to that size standard. For
example, when you print only on A series paper, you are recommended
to set Original Size Setting to A Series, so that the scan operation time is
reduced.
Operation.)
User's Manual
User's Manual for