Oki lp-1030-mf User Manual page 121

Q.
When copying a long original, an original jam occurred when outputting
the original.
A.
This is not a Printer malfunction.
Remove the jammed original by following the message displayed on the
panel. The Printer can then be used as normal.
Q.
The right and left edges of the original are not scanned.
A.
The original's size standard is not specified correctly.
Set the submission function's Original Size Standard to the size standard
of the original you intend to load
To specify the original's size standard you have never specified, set the size
standard to On in Available Size Standard of the System menu. (For more details,
see Chapter 3
Q.
When a user defined series original is scanned, the right and left edges of
the original are not scanned.
A.
The user defined size is not specified correctly.
Set a user defined size appropriate for the original in User Defined Size of
the System menu. (For more details, see
Manual for Basic Printer
Q.
Cannot perform scanning in color.
A.
Color scanning is an optional function (Color Scan Upgrade (LP-857)).
Color scanning is only available after purchasing the Color Scan Upgrade.
Q.
While scanning, the Printer frequently suspends feeding the original document.
A.
When the room temperature is low, on the hard disk drive to save the scan
images the operation speed may decrease.
Check that the room temperature is within the range from 15˚C to 35˚C (59
to 95˚F). If not, you are recommended to increase the room temperature
to be within the range from 20˚C to 30˚C (68 to 86˚F).
( & page 38
User's Manual for Basic Printer
in the separate
Operation.)
LP-1030-MF User's Manual for Multifunction Printer Operation
).
Operation.)
Chapter 3 in the separate
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
User's
Chapter
6
121