Oki lp-1030-mf User Manual page 119

For more on setting the printing paper series, see Installing Paper with
Other Size Series in
Printer
For more on Installing user defined series paper, see Installing Paper
from a User Defined Standard in
Manual for Basic Printer
For the original's setting, specify the size standard of the original you
intend to copy at the copy function's Original Size Standard.
38 ).
Q.
With a user defined size original,
- The Printer does not copy the right and left edges of the original; or
- The Printer adds a blank space to the right and left edges to the copy printout.
A.
The user defined size is incorrect.
Refer to Using Paper from a User Defined Series in
separate
defined size appropriate for the original and roll paper you intend to use.
A.
The user defined series original width does not match the user defined
series roll width.
Match the user defined series original width with the user defined series
roll width. The Printer does not copy correctly when the widths are
different, for example:
- The original width to 914 mm (35.98 inches); and
- The roll width: to 880 mm (34.65 inches)
Q.
Cannot perform partial copying.
A.
- The distance specified below is longer than the original length.
From: Original's front end
To: Partial copy start position
For partial copying, specify the partial copy start position to be less than
the original length.
Chapter 2
Operation.
Operation.
User's Manual for Basic Printer
LP-1030-MF User's Manual for Multifunction Printer Operation
of the separate User's Manual for Basic
Chapter 2
of the separate
Chapter 2
Operation. Specify a user
Chapter
1
Chapter
User's
2
( & page
Chapter
3
Chapter
4
of the
Chapter
5
Chapter
6
119