Deck Re-Waxing Procedure - Vision Fitness Vision series Service Manual

DECK RE-WAXING PROCEDURE

Frequency:
LUBE
Name:
DOW CORNING 350 SILICON
Procedure:
1. Loosen the tension bolts at both ends.
2. Pull the belt with your left hand and apply the silicon in the deck with your right
hand. (The volume of silicon applied is about 25CC.)
3. Tighten the tension bolts.
4. Start the treadmill. Step on the treadmill belt to walk the silicon in. Adjust the
belt tension if necessary.
5. With the clamp-on meter, measure the current draw of the motor. (Clamp on
either the red or the black wire.) The current should be less than 15Amps for
110V model. (less than 7.5Amps for 220V model.)
Every 1 month .
1-3 Revision: 1.0 Date: 2001-06-01