Air Shock (T7200/8200) - Vision Fitness Vision series Service Manual

AIR SHOCK REPLACEMENT
Tools required:
ü Wrench ( 13mm)
Procedure:
1. Fold up and engage the treadmill by using the deck-
locking knob.
2. Use wrench (13mm) to loosen screws holding air
shock to the frame, and remove the air shock.
3. Replace with a new air shock.
4. Add some lubricating oil on the shaft of the air shock.
5. Lift the frame up and down, repeating this several
times to allow the lubricating oil blend into air shock.
7-16
(T7200/8200)
Revision: 1.0 Date: 2001-06-01