Vision Fitness Vision series Service Manual page 62

CONSOLE CABLE REPLACEMENT
Tools required:
ü Philips screwdriver
ü
T-handle key (5mm).
Procedure:
5. Loosen screws attaching the right handrail to the right support and remove the
right handrail.
6. Remove the snap bushing. Tie the new console cable to the old one with a solid
string at the rear end.
7. Pull the old cable from the top end of the cable until the new cable treads all the
way through the right support.
8. Install the right hand rail and tighten the screws .
9. Reconnect the console cable to PCB and MCB.
10. Install all covers and secure the screws.
(T7200/8200)
7-13 Revision: 1.0 Date: 2001-06-01