Tools Required - Vision Fitness Vision series Service Manual

Tools required:

ü Philips screwdriver
Procedure:
MCB REPLACEMENT
1. Loosen screws of the front top cover by using
screwdriver and remove it.
2. Fold up and engage the frame to the left side support
by using deck-locking knob.
3. Remove the motor cover.
4. Disconnect the cables from connected the MCB.
5. With the screwdriver loosen MCB and remove it.
6. Replace the MCB with a new one and tighten the
screws holding the MCB to the frame.
7. Reverse step 1-4 to install all parts.
(T-7200/8200)
7-2 Revision: 1.0 Date: 2001-06-01