NON-HRC CONSOLE ENG. MODE GUIDE
I. How to Enter Engineering Mode
1. Turn power on, then remove the safety key from the console.
2. Press and hold down the elevation UP key.
st
(1
revision)
3. Place the safety key back on the console.
4.
1. Turn power on, then remove the safety key from the console.
2. Press and hold down the UP and SLOW key.
nd
(2
revision)
3. Place the safety key back on the console.
4. The display should read :
1. Turn power on, then place the safety key on the console.
2. Press and hold down the UP and SLOW keys about 7 seconds.
st
(3
revision)
3. The display should read :
The display should read :
OR
4-2
Revision: 1.0
Date: 2001-06-01