Vision Fitness Vision series Service Manual page 59

INCLINE MOTOR REPLACEMENT
(T7200/8200)
Tools required:
ü Philips screwdriver
ü Wrench ( 17mm)
Procedure:
6. Loosen the bolts from both ends of the incline motor by using wrench (17mm).
7. Replace the incline motor.
8. Reverse the step 6 - 5.
9. Turn on the power and enter the Engineering Mode to check if the extreme speeds
are within the correct range.
11. Put on the covers and secure the screws.
7-11 Revision: 1.0 Date: 2001-06-01