Vision Fitness Vision series Service Manual page 22

NON-HRC CONSOLE ENG. MODE GUIDE
II To choose metric or British mode.
1. Press the UP key to reach the
2. Verify the right window reads
000 (British) or 001 (Metric) ... ... ... T7200/8200
002 (British) or 003 (Metric) ... ... ... T8500
006 (British) or 007 (Metric) ... ... ... T7400/8400
00A (British) or 00B (Metric) ... ... ..T8600P
And press SELECT, START key to store.
III To set speed values.
1. Press the DOWN key to reach the
2. Press the FAST or SLOW key and using a tachometer to adjust the speed
of the treadmill to 0.5mph (1.0kph). Press the SELECT key to store.
3. Press the UP key to reach the
4. Pressing the FAST or SLOW key and using a tachometer to adjust the
speed of the treadmill to 10.0mph (15.0 kph).
Press the SELECT key to store.
Press the START key to calibrate.
IV To set elevation values.
1. Press the UP key to reach the
2. Press and hold down the SLOW key until the deck goes to the minimum
incline. Press FAST key to go few.
Then press the SELECT key to store.
3. Press the UP key to reach the
4. Press and hold down the FAST key until the deck goes to the maximum
incline. Press the SLOW key to go few.
5. Press the SELECT key to store. Press the START key to calibrate.
P6
address.
P0
address.
P1
address.
12.0mph (18.0 kph)for T8600P.
P4
address.
P5
address.
4-2
Press SLOW or FAST key
to choose unit
Revision: 1.0 Date: 2001-06-01