Air Shock(T9250/9350/9450Hrt) - Vision Fitness Vision Series Service Manual

AIR SHOCK REPLACEMENT
Tools required:
Wrench ( 13mm)
Procedure:
1. Fold up the treadmill by pulling the locking Lever.
2. Use wrench (13mm) to loosen screws holding air shock to the frame, and
remove the air shock.
3. Replace with a new air shock.
4. Add some lubricating oil on the shaft of the air
shock.
5. Lift the frame up and down, repeating this several
times to allow the lubricating oil blend into air
shock.
(T9250/9350/9450HRT)