Toro Workman MDX-D Service Manual page 64

6. Disassemble differential case assembly.
1. Bolt (6 used)
2. Gear 62
A. Remove six (6) bolts securing gear 62 to the dif-
ferential case.
1. Spring pin
2. Differential case
NOTE: The spring pin can be punched out from the hole
on the opposite side of gear 62.
B. Remove spring pin from the differential case. Dis-
card pin and replace it with new spring pin.
Drive Train
1
3
4
2
3
Figure 35
3. Differential case
4
1
Figure 36
3. Pinion shaft
4. Pinion gear
C. Remove pinion shaft and gears from the case.
Separate gears from shaft.
Page 4 - - 30
2
Workman MDX--D