Toro Workman MDX-D Service Manual page 59

1
1. Counter shaft
2. Spacer (2 used)
B. Pull out counter shaft. Remove spacer, needle
bearing, gear 34 and spacer.
1. Counter shaft
2. Spacer (2 used)
C. Replace counter shaft if it has abnormal wear,
cracks or damage.
D. Replace spacer if either one is cracked or bent.
Workman MDX--D
4
Figure 26
2
1
Figure 27
Page 4 - - 25
3
2
3. Needle bearing
4. Gear 34
3
2
4
3. Needle bearing
4. Gear 34
E. Replace needle bearing if needles are bent, do
not rotate freely or do not remain in the bearing cage.
F. Replace gear 34 if worn or damaged. Cracked,
broken, missing or chipped gear teeth are not ac-
ceptable.
Drive Train