Toro Workman MDX-D Service Manual page 57

1. Flange bolts (3 used)
2. Axle bracket
E. Remove three (3) flange bolts securing the axle
bracket and axle case to each case. Separate brack-
et from each axle case.
1. Flange bolt (10 used)
F. With the input shaft side down, loosen and re-
move flange bolts and nuts securing the case (RH)
and case (LH) together. Note location of cable brack-
et for assembly purposes.
Workman MDX--D
3
Figure 22
2
1
Figure 23
Page 4 - - 23
1
2
3. Axle case
2. Flange nut
Drive Train