Panasonic AJ-PX270 Operating Instructions Manual page 189

@ NOTE
t You can save the details you set in Step
CARD)] in the main menu → [NETWORK SETUP] → [STREAMING SETTING].
Configuring the settings by directly referring to the settings contained in the SD memory card
Configure the settings by directly referring to the settings contained in the SD memory card without saving it in the camera.
First, insert the SD memory card that contains the settings, then turn on the power of the camera.
1
Set the connection method when connecting the camera to a network.
Select [WLAN], [4G/LTE], or [LAN] in the main menu → [NETWORK SETUP] → [NETWORK SEL]. For details on each connection method, refer to
"Wireless LAN settings" (page 182) and "Wired LAN settings" (page 185).
2
Configure the network settings of the camera.
Select [SD CARD] in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [SETTING DATA].
@ NOTE
t The setting value of the SD memory card can be saved in following method.
- Select [SAVE (SD CARD)] in the main menu → [NETWORK SETUP] → [STREAMING SETTING].
Configuring the settings after saving the settings contained in the SD memory card to the camera
Configure the settings after saving the settings contained in the SD memory card to the camera.
1
Set the connection method when connecting the camera to a network.
Select [WLAN], [4G/LTE], or [LAN] in the main menu → [NETWORK SETUP] → [NETWORK SEL]. For details on each connection method, refer to
"Wireless LAN settings" (page 182) and "Wired LAN settings" (page 185) before configuring the settings.
2
Configure the network settings of the camera.
1) Select [INTERNAL] in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [SETTING DATA].
2) Insert the SD memory card which contains the settings and select [LOAD (SD CARD)] in the main menu → [NETWORK SETUP] →
[STREAMING SETTING].
Chapter 9 Network Connection — Network function
2
into an SD memory card by using the steps below. Insert the SD memory card and select [SAVE (SD
– 189 –