[Clip] - Panasonic AJ-PX270 Operating Instructions Manual

Item
[UBG MODE]
[UB PRESET]
[VITC UBG MODE]
[REC META DATA] [LOAD]
[RECORD]
[USER CLIP NAME]
[CARD SERIAL]
[INITIALIZE]
[PROPERTY]
[LANGUAGE]

[CLIP]

This menu is used when performing various tasks, such as playing back, deleting, copying clips, and editing metadata, while viewing the thumbnail of
the clips displayed in the viewfinder or LCD monitor.
These menu items are enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specific situations such as in USB host mode or on the explorer screen.
Item
[REPOSITION]
[DELETE]
[FORMAT]
[FORMAT(STORAGE)]
Chapter 6 Menu Operations — Menu list
Selects the user bits mode.
[USER]: Selects the user bits value that has been set.
[TIME]: Selects the local time. (hh, mm, ss)
[DATE]: Selects the local date and time. (YY, MM, DD, hh)
[EXT]: Records the user bits values currently input to the <TC IN/OUT> terminal.
[TCG]: The value of [TCG] is recorded as user bits.
[FRAME RATE]: Selects camera imaging information (such as frame rate).
[REGEN]: Reads the value recorded to the card and continuously records that value.
f Factory setting: [USER]
Sets user bits. Note that [USER] must be set for [UBG MODE].
Selects the VITC user bits mode.
[USER/EXT]: When [UBG MODE] is [EXT], follows the value and when other than [EXT], records the user
value set in [USER].
[TIME]: Selects the local time. (hh, mm, ss)
[DATE]: Selects the local date and time. (YY, MM, DD, hh)
[TCG]: The value of time code generator is recorded as user bits.
[FRAME RATE]: Selects camera imaging information (such as frame rate).
[REGEN]: Reads the value recorded to the card and continuously records that value.
f Factory setting: [USER/EXT]
Loads the metadata upload file saved to the SD memory card.
Sets whether to add loaded metadata at a recording.
[ON]: Adds metadata.
[OFF]: Does not add metadata.
f Factory setting: [OFF]
Sets data to be recorded to [USER CLIP NAME].
(When [RECORD] is [ON])
[TYPE1]: Records setting values of the loaded data.
[TYPE2]: Records the loaded data and counter value.
(When [RECORD] is [OFF])
[TYPE1]: Records the same value as [GLOBAL CLIP ID].
[TYPE2]: Records the same value as [CLIP NAME].
f Factory setting: [TYPE1]
Enables/disables the function for recording the text memo with the serial number or the type of card as
metadata.
[ON], [OFF]
f Factory setting: [OFF]
Deletes all loaded metadata and initializes.
Checks and corrects loaded metadata.
Sets the language used to display metadata. (Only when [NTSC(J)] is selected as the region of use)
[ENGLISH], [JAPANESE]
Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP]: Displays all clips as thumbnails.
[SAME FORMAT CLIPS]: Displays only the clips recorded in the same format as the system format as
thumbnails. Clips recorded in the same format means that each item of [LINE&FREQ], [REC FORMAT],
and [AUDIO SMPL RES] in the main menu → [SYSTEM MODE] matches the current setting status.
Example) [1080-59.94i], [AVC-I100], [24BIT]
[SELECTED CLIPS]: Displays only the clips selected with the control stick as thumbnails. The thumbnails
appear in selected order.
[MARKED CLIPS]: Displays only the clips with shot marks added as thumbnails.
[TEXT MEMO CLIPS]: Displayed only clips with text memo data attached as thumbnails.
[SLOT CLIPS]: Displays only the clips of the selected slot as thumbnails.
[NG CLIPS]: Displays only the clips with defective clip indicators added as thumbnails.
f Factory setting: [ALL CLIP]
Deletes selected clips.
When the [FORMAT] menu is selected, format the P2 card of the specified slot.
[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD]
f When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
f Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
When in USB host mode, formats a storage device connected to the <USB3.0 HOST> terminal using the
specified file system.
[TYPE S]: Formats in the [TYPE S] format.
[FAT]: Formats in the [FAT] format.
This item is enabled only while the storage explorer screen or storage thumbnail screen is displayed.
– 140 –
Description of settings
Description of settings