Panasonic AJ-PX270 Operating Instructions Manual page 157

26 Focus control information display
Displays the focus control information with [99] to [00]. [AF] is indicated for auto focus, and [MF] is indicated for manual focus. Also, when [MF
ASSIST] is set to [ON] in the main menu → [SW MODE] while in manual focus mode, [MA] is indicated.
[95] (distance to the subject: infinity) to [00] (distance to the subject: approx. 5 cm)
Depending on the zoom position, the subject may not be within the macro range.
Also, depending on the zoom position, the lowest value of the macro range may vary. The display unit can be changed to feet or meters from the
main menu → [DISPLAY SETUP] → [ZOOM/FOCUS].
While macro shooting is performed, [AF] or [MF] will be displayed in black and white reversal.
27 Macro display
Displayed when you have enabled the macro focus function using the <MACRO> button.
28 Recommended ND filter display
Displays the ND filter recommended for the current shooting conditions.
29 Camera warning, notification display area (pages 203, 158)
30 Area frame display
Displayed when the control stick is pressed when the function is assigned in the main menu → [SW MODE] → [AREA MODE].
31 Area display
Displayed when in area mode.
32 Flash band compensation function display
Displayed when the flash band compensation function is activated.
33 Dynamic range stretcher function display
Displayed when the dynamic range stretcher function is working.
34 Scene file name display
Indicates the scene file name [F1:] to [F6:].
35 Image stabilization display
Displayed when the <OIS> button is pressed and the image stabilizer mode has been set.
36 Battery charge level indicator
As the battery level decreases, the indication changes
When the battery runs out,
(When the camera is running on the AC adaptor,
The battery charge level may not be indicated correctly in a place where the temperature is extremely low or high, or when the camera has not been
used for a long period of time. To display the remaining battery level correctly, fully charge the battery, use the camera until the battery runs out, and
then charge again. (Even after performing the procedure, the remaining battery may not be indicated correctly if the battery is used under extremely
low or high temperature for a long period of time or if the battery has been repeatedly recharged.)
Note that the time in the battery charge level indicator is an approximate estimate as it changes according to the conditions of use.
37 P2 card remaining free space
: This is the slot No. This is displayed in black and white inversion when the slot No. is recording destination. It flashes while the card is being
f
recognized.
f [***min]: Displays the remaining space on the media in each slot. During a near end, it flashes.
f (No display): Not displayed when a card is not inserted.
f [END]: Displayed when there is no space remaining on each card.
f [WP]: Displayed when the P2 card is write-protected.
f [ERR]: Displayed in case of format errors or authentication errors.
f [LOOP ***min]: Displayed when the loop recording mode is set. During the mode check, the second line displays the standard recording time of
loop recording. [LOOP] flashes when loop recording is not possible, for example, when there is no more space remaining on the microP2 memory
card.
38 Recording media display
Among P2 and microP2 memory card slots, displays the slot that can perform recording and playback operations set in the main menu →
[RECORDING SETUP] → [REC MEDIA].
f [mP2]: microP2 memory card slot
f [P2]: P2 memory card slot
39 Simultaneous recording mode display, background recording mode display
f [SIMUL]: Displayed when the simultaneous recording is set. When the simultaneous recording cannot be performed, [SIMUL] indication is
displayed with a diagonal line.
f [BACKGR]: Displayed when the camera is in the background recording mode and background recording is being performed on slot 2. When
background recording has not started on slot 2, the [BACKGR] indication is displayed with a diagonal line.
40 High-sensitivity mode display
Displayed when [HIGH SENS.] is set in the main menu → [SYSTEM MODE] → [SHOOTING MODE].
41 One clip recording mode status display
f [1-CLIP]: The status where a new clip is to be recorded in one-clip recording
f [1*CLIP]: The status where recording can be performed by combining to the previous clip in one-clip recording
42 Recording/playback operation status display
f [REC]* : Recording
1
f [PAUSE]: Recording standby
f [&]: Playback pause
f [=]: Playback
f [&=] ([~&]): Frame-by-frame playback (frame-by-frame rewind)
f [)] ([%]): Fast-forwarding/fast-forward playback (fast-reversing/fast-reverse playback)
f [CLIP&=] ([CLIP~&]): Clip forwarding (clip rewinding), cueing up by clips
Chapter 7 Display — Screen status display
→
( ) flashes.
is displayed.)
→ → → →
– 157 –
.