Panasonic AJ-PX270 Operating Instructions Manual page 174

Chapter 8 Connecting to External Devices — Connection function via <USB2.0 DEVICE> or <USB3.0 HOST> terminal
Writing back to the P2 card from a storage device (import)
Importing from a [TYPE S] storage device or [P2STORE] by partition
You can import (write back to a P2 card from as storage device) to a P2 card with the same part number as the source card by partition (card).
1
Insert a P2 card that will serve as the input destination.
Make sure to insert a formatted P2 card.
2
Connecting a storage device.
3
Select [STORAGE] in the main menu → [CLIP] → [EXPLORE] to display the explorer screen.
4
In the explorer screen, display the partition thumbnails to be imported.
5
Select [IMPORT] in the main menu → [CLIP].
6
Place the cursor on the P2 card slot number of the import destination and press the control stick.
Start importing by selecting [YES] in the confirmation message.
[COPY COMPLETED!] will be displayed when importing is completed.
@ NOTE
t Importing to a P2 card that is different from the source P2 card may result in incomplete clips depending on the clips. In this case, use the
reconnection function to reconfigure the clips. For details, refer to "Reconnecting incomplete clips" (page 115).
t You can select whether to perform verification at the time of copying in the main menu → [CLIP] → [STORAGE COPY SETUP] → [VERIFY].
t You cannot import by partition to a P2 card of a different model. Perform copying by clip instead.
Copying to a P2 card by clip
You can specify a storage device clip and copy it to a P2 card.
1
Open the storage device thumbnail screen.
2
Select the clip you want to copy.
3
In the main menu → [CLIP] → [COPY] → [STORAGE] list, move the cursor over the copy destination and press the control stick.
Start importing by selecting [YES] in the confirmation message.
[COPY COMPLETED!] will be displayed when copying is completed.
– 174 –