[Sw Mode] - Panasonic AJ-PX270 Operating Instructions Manual

Item
[USER8]

[SW MODE]

Configure the settings of each mode when switched using each switch.
These menu items cannot be set when the thumbnail screen is displayed.
Item
[LOW GAIN]
[MID GAIN]
[HIGH GAIN]
[SUPER GAIN]
[OIS]
[ATW]
[ATW SPEED]
[ATW TARGET R]
[ATW TARGET B]
[W.BAL PRESET]
[W.BAL VAR]
[H.ZOOM SPEED]
[PUSH AF MODE]
[MF ASSIST]
Chapter 6 Menu Operations — Menu list
Sets the function to be assigned to the <IRIS> button.
[INHIBIT], [SCENE FILE SEL], [LEVEL GAUGE], [LEVEL GAUGE RESET], [WFM], [D.ZOOM], [DRS],
[FBC], [S.GAIN], [1S.EXP.], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [BLACKFADE],
[WHITEFADE], [A.IRIS LEVEL], [IRIS], [Y GET], [FOCUS ASSIST], [FOCUS MACRO], [OIS], [FAST
ZOOM], [ZEBRA], [EVF ON/OFF], [PRE REC], [TEXT MEMO], [SHOT MARK], [DEL LAST CLIP],
[SLOT SEL], [REC MEDIA], [AUDIO MON SEL], [REC CHECK], [BACKGR REC PAUSE], [USB
MODE], [PLAYLIST], [REC DURING UPLOAD], [UPLOAD LIST], [STREAMING START]
f Factory setting: [IRIS]
Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[−3dB]...[18dB]
f Factory setting: [0dB]
Sets the gain value to be assigned to the <M> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[−3dB]...[18dB]
f Factory setting: [6dB]
Sets the gain value to be assigned to the <H> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[−3dB]...[18dB]
f Factory setting: [12dB]
Sets the super gain to be assigned to the USER button.
[24dB], [30dB], [36dB]
[ALL]: Each time the USER button is pressed, the setting toggles [24dB] → [30dB] → [36dB] → (off) in
order.
f Factory setting: [36dB]
Enables/disables the image stabilizer function.
[ON]: Enables the image stabilizer function.
[OFF]: Disables the image stabilizer function.
f Factory setting: [ON]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
[Ach], [Bch], [PRE], [OFF]
f Factory setting: [OFF]
Sets the control speed of the auto tracking white balance function.
[FAST], [NORMAL], [SLOW]
f Factory setting: [NORMAL]
Finely adjusts the Rch output for convergence with auto tracking white balance operation.
[−10]...[10]
f Factory setting: [0]
Finely adjusts the Bch output for convergence with auto tracking white balance operation.
[−10]...[10]
f Factory setting: [0]
Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.
[3200K], [5600K], [VAR]
f Factory setting: [3200K]
Sets the value of [VAR] in [W.BAL PRESET].
It can also be operated by the <SEL/PUSH SET> dial button.
Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.
[2000K]...[15000K]
f Factory setting: [3200K]
Sets the zoom speed when the HANDLE ZOOM switch is <FIX>.
[1]...[99]
f Factory setting: [50]
Assigns the operation mode when the <PUSH AUTO> button is pressed.
[TURBO]: Performs high-speed focusing automatically until the image is focused, once the button is
pressed.
[NORMAL]: Performs automatic focusing while pressing the button.
f Factory setting: [TURBO]
Sets whether to adjust the last focus automatically when in the manual focus mode.
[ON]: Adjusts the last focus automatically.
[OFF]: Does not adjust the focus automatically.
f Factory setting: [OFF]
If the image is largely out of focus, the focus may not be adjusted properly.
Operations with a remote control connected to the <CAM REMOTE> terminal are not available.
– 136 –
Description of settings
Description of settings