Source Setup - Onkyo TX-NR535 Advanced Manual

Setting item Default Value
Center Width (PLII 3
Center Width)
Center Image 2
(Neo:6 Center
Image)
Listening Angle Wide
⿠ Values recommended for "Listening Angle" are 20° when "Narrow" is selected, and 40° when "Wide"
is selected.
Setting Details
Configure the settings to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Dolby Prologic II
Music listening mode. Allows you to configure the
width of the sound from the center speaker.
"0" to "7": Smaller the setting value is,the sound
is gathered to the center, and larger the setting
value is, the sound is distributed to the front left
and right speakers.
Allows you to configure the width of the front
sound field when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Smaller the setting value is, the front
sound field is gathered to the center, and larger
the setting value is, the front sound field is
distributed to the front left and right speakers.
Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°

9. Source Setup

The setting can be separately set to each input selector button. Select the input selector to
configure.
Setting Item Default Value
AccuEQ Off
Name -
Advanced Settings
Setting Details
Allows you to disable or enable the sound field
correction set on automatic speaker setup.
"On": Enable this function
"Off": Disable this function
In the following cases, the settings cannot be
changed:
⿠ Automatic Speaker Setup is not being
performed.
⿠ Headphones are connected.
Allows you to rename the currently selected input
selector for easy identification.
⿠ Same name cannot be set for multiple input
selectors. Moreover, a name cannot be
configured for the input selectors "AM", "FM",
"NET", "USB", and "BLUETOOTH".
23