Ipod/Iphone Operation; Updating The Firmware; Sammary Of Firmware Update - Onkyo TX-NR535 Advanced Manual

iPod/iPhone Operation

The RI Dock allows you to use the AV receiver's remote
controller to operate and play music on your iPod/iPhone.
Moreover, it also allows you to view videos on your iPod/
iPhone on the screen of your TV, as well as perform RI
operations if connected via RI. This operation is possible
only when the RI remote control code is programmed.
Before Operation
Before performing any operation on your iPod/iPhone,
make sure to have it updated to the latest version
via iTunes. Certain buttons may not work for some
iPod/iPhone models and generations, or RI Dock.
For details on the operation, refer to the RI Dock's
instruction manual.
Switch the remote controller mode by pressing the
REMOTE MODE button programmed with the remote
control code. Then, operate by using the corresponding
buttons. Point the remote controller at the unit.
1
REMOTE MODE
1
SOURCE
2
MUTING
3
VOL /
4
ALBUM +/－
5
6
7
TOP MENU
6
/ / / , ENTER, PLAYLIST /
7
MENU
8
9
F
, , ,
9
REPEAT, RANDOM
F
MODE
G
DISPLAY
H
2
⿠ Pressing DISPLAY turns on the backlight for a few
seconds.
⿠ MODE allows you to use the Resume function. You can
resume playing from the song that was playing when
you removed your iPod/iPhone from the DS-A2 RI Dock.
3
4
5
Connecting and Operating Onkyo RI Components/Updating the Firmware
8
G
H
, , ,

Updating the Firmware

Sammary of Firmware Update

There are two methods for updating the firmware: via
network and via USB.
Use the one that best suits your environment.
⿠ For the latest information on updates, visit the Onkyo
website.
⿠ Before updating, make sure that the speaker setup
microphone is not connected.
⿠ During an update, do not
– Disconnect and reconnect any cable, USB storage
device, speaker setup microphone or headphones,
or perform any operation on the component such as
turn off its power
– Access to this unit from a PC or smartphone using
Android application
⿠ The update may take about 10 minutes to complete for
either method, via network or via USB.
Furthermore, existing settings are saved regardless of
the method used.
Disclaimer: The program and accompanying online
documentation are furnished to you for use at your own
risk.
Onkyo will not be liable and you will have no remedy for
damages for any claim of any kind whatsoever concerning
your use of the program or the accompanying online
documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will Onkyo be liable to you or any third party for
any special, indirect, incidental, or consequential damages
of any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other
reason whatsoever.
35