Level Cal (Level Calibration); Audio Adjust - Onkyo TX-NR535 Advanced Manual

7. Level Cal (Level Calibration)

Allows you to adjust the level of each speaker with the built-in test tone. Settings are
automatically configured if you use the Automatic Speaker Setup.
Setting Item Default Value
Front Left 0 dB
Center 0 dB
Front Right 0 dB
Surround Right 0 dB
Surround Left 0 dB
Subwoofer 0 dB
⿠ In the following cases, the settings for "Level Cal" cannot be changed:
㽎 Headphones are connected.
㽎 "Audio TV Out" is set to "On".
㽎 Speakers for which "Sp Config" are set to "No" or "None".
㽎 Mute (MUTING) is set.
㽎 "HDMI CEC (RIHD)" is set to "On" and you're listening through your TV speakers.
22
Setting Details
Select a value between "-12 dB" and "+12 dB".
Select the desired volume level accordingly to
the test tone which is output as you change the
value.
Select a value between "-12 dB" and "+12 dB".
Select the desired volume level accordingly to
the test tone which is output as you change the
value.
Select a value between "-12 dB" and "+12 dB".
Select the desired volume level accordingly to
the test tone which is output as you change the
value.
Select a value between "-12 dB" and "+12 dB".
Select the desired volume level accordingly to
the test tone which is output as you change the
value.
Select a value between "-12 dB" and "+12 dB".
Select the desired volume level accordingly to
the test tone which is output as you change the
value.
Select a value between "-15 dB" and "+12 dB".
Select the desired volume level accordingly to
the test tone which is output as you change the
value.

8. Audio Adjust

Allows you to configure various settings related to sound, such as settings for listening to
multiplex audio or multilingual TV broadcasts and sound field settings for listening modes.
Setting item Default Value
Input Ch (Mux) Main
(Multiplex Input
Channel)
Input Ch (Mono) Left + Right
(Mono Input
Channel)
Panorama (PLII Off
Panorama)
Dimension (PLII 0
Dimension)
Advanced Settings
Setting Details
Set the audio channel or language to output
when listening to multiplex audio or multilingual
TV broadcasts etc.
"Main": When playing primary audio channel.
"Sub": When playing secondary audio channel.
"Main/Sub": When playing both primary and
secondary audio channel.
Allows you to set the input channel to use for
playing any 2 ch digital source such as Dolby
Digital, or 2-ch analog/PCM source in the Mono
listening mode.
"Left": When playing left channel source only.
"Right": When playing right channel source only.
"Left + Right": When playing both left and right
channel source only.
Configure the sound field settings for playing
any 2 ch digital source such as Dolby Digital, or
2-ch analog/PCM source in the Dolby Prologic II
Music listening mode. Allows you to configure the
sound field width of front stereo image.
"On": To broaden the width of the front stereo
image
"Off": Default value.
Configure the sound field settings for playing
any 2 ch digital source such as Dolby Digital, or
2-ch analog/PCM source in the Dolby Prologic II
Music listening mode. Allows you to configure the
sound field position forward or backward.
"-3" to "3": With "0" at the center, smaller the
setting value is, more the sound field moves
forward, and larger the setting value is, more the
sound field moves backward.