Installing The Cooling Fan Blank - Dell PowerEdge R330 Owner's Manual

Steps
1. Press the release tabs and push the cooling fan blank to disengage it from the cooling fan bracket.
2. Lift the cooling fan blank out of the cooling fan bracket.
Figure 30. Removing and installing a cooling fan blank
1. cooling fan blank (2)
3. cooling fan bracket
Next steps
1. Install the cooling fan.
2. Follow the procedure listed in
Related Tasks
Installing a cooling fan

Installing the cooling fan blank

Installing the cooling fan blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: The procedure for removing each cooling fan blank is identical.
1. Ensure that you follow the
2. Follow the procedure listed in
After working inside your
Safety instructions.
Before working inside your
2. release tab (2)
4. tab
system.
system.
79