Dell PowerEdge R330 Owner's Manual page 12

Item Indicator, Button, or
Connector
4 USB management port/
iDRAC managed USB
port
5 USB connector
6 Optical drive slot
7 LCD menu buttons
8 Information tag
9 LCD panel
10 Video connector
11 Hard drive slots
Figure 3. Front panel features and indicators — four 3.5-inch cabled hard drive chassis
12
Icon Description
Press the system identification button to turn the
system ID on or off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup),
press and hold the button for more than 15
seconds.
Functions as a regular USB port or provide access
to the iDRAC Direct features. For more
information, see the iDRAC User's Guide at
Dell.com/idracmanuals.
Enables you to connect USB devices to the
system. The port is USB 2.0-compliant.
Enables you to install an optional slim SATA DVD-
ROM drive or DVD+/-RW drive.
Enable you to navigate the control panel LCD
menu.
Contains system information such as service tag,
NIC, MAC address for your reference. The
information tag is a slide-out label panel.
Displays system ID, status information, and system
error messages. See
Enables you to connect a VGA display to the
system.
Enables you to install up to eight 2.5-inch hot
swappable hard drives.
LCD panel features.