Documentation Matrix - Dell PowerEdge R330 Owner's Manual

Convention Power Indicator
Pattern
D Flashing amber
E Not lit

Documentation matrix

The documentation matrix provides information on documents that you can refer to for setting up and
managing your system.
Table 10. Documentation matrix
To...
Install your system into a rack
Set up your system and know the system technical
specifications
Install the operating system
Get an overview of the Dell Systems Management
offerings
Configure and log in to iDRAC, set up managed
and management system, know the iDRAC
features, and troubleshoot by using iDRAC
Know about the RACADM subcommands and
supported RACADM interfaces
20
Condition
with respect to efficiency, feature set, health status, and supported
voltage. Ensure that both the PSUs are the same.
Indicates a problem with the PSU.
CAUTION: When correcting a PSU mismatch, replace only the
PSU with the flashing indicator. Swapping the other PSU to
make a matched pair can result in an error condition and
unexpected system shutdown. To change from a High Output
configuration to a Low Output configuration or vice versa,
you must turn off the system.
CAUTION: AC PSUs support both 220 V and 110 V input
voltages with the exception of Titanium PSUs, which support
only 220 V. When two identical PSUs receive different input
voltages, they can output different wattages, and trigger a
mismatch.
CAUTION: If two PSUs are used, they must be of the same type
and have the same maximum output power.
CAUTION: Combining AC and DC PSUs is not supported and
triggers a mismatch.
Power is not connected.
See the...
Rack documentation included with your rack
solution
Getting Started With Your System that shipped with
your system or see Dell.com/poweredgemanuals
Operating system documentation at Dell.com/
operatingsystemmanuals
Dell OpenManage Systems Management Overview
Guide at Dell.com/openmanagemanuals >
OpenManage software
Integrated Dell Remote Access Controller User's
Guide at Dell.com/idracmanuals
RACADM Command Line Reference Guide for
iDRAC at Dell.com/idracmanuals