Dell PowerEdge R330 Owner's Manual page 129

3. Hold the system board by the touch points and lift it out of the chassis.
CAUTION: To prevent damage to the system board, do not lift the system board by holding a
memory module, processor, or other components; hold the system board by its edges only.
Figure 62. Removing and installing the system board
1. touch point (2)
3. system board
Next steps
1. Install the system board.
2. Follow the procedure listed in
Related Tasks
Removing the cooling shroud
Removing a memory module
After working inside your
2. screw (8)
system.
129