Oki C911 Maintenance Manual page 78

Oki Data CONFIDENTIAL
LCD Status Message Online
Inspection
lamp
indicator
( represents a blank line.)
Varies Varies PU flush error (An error occurred during
*** Flash Error
Varies Varies Indicates that the job account log buffer
Accounting Log
Buffer is near full
Varies Varies Notifies users that the job account log
Accounting Log
Buffer Full(Delete
old logs)
Varies Varies Indicates that a USB Hub not supported
USB Hub
Unsupported
Please detach it
45530603TH Rev.2
Details
rewrite of the PU firmware or writing of
LED head information etc. into the PU
flush has failed.)
%PUFLASH%
PU
Tray2
Tray3
Tray4
Tray5
Duplex
Sub CPU1
Sub CPU2
IM
is almost full.
buffer is full (related to JobAccount).
This status is displayed under the
conditions when the job account log
flash memory in the printer runs out of
space and also "Operation at Log Full"
of the job accounting server software is
set to "Delete old logs."
If the printer is continuously operated
under these conditions, the old job
account logs in the buffer will be deleted
until the near full status is cleared.
To preserve the old job account logs
in the buffer, the job account logs in
the printer must be got from the job
accounting server software. The other
way is changing the setting of "Operation
at Log Full" to "Do not acquire the log"
in the job accounting server software.
by this printer is connected. This
message remains displayed until the
USB Hub not supported by this printer
is removed.
Remedial
LCD Status Message Online
measure indicator
( represents a blank line.)
– Varies Varies Indicates that a USB device not
Unsupported USB
Device Detected
Please detach it
Varies Varies Indicates that the MOPY data caused
Collate Fail: Too
Many Pages
Press OK Button
Varies
–
Multi-purpose
tray has not been
configured properly,
verify multi-purpose
–
tray settings.
Multiple copies
printed.
Press OK Button
Varies
Hard disk is not
installed. Multiple
copies printed.
Press OK Button
Varies
Color Restricted.
Mono Printed
Press OK Button
Varies
Remove
the USB
Color Restricted.
Hub.
Job Rejected
Press OK Button
4. TROUBLESHOOTING PROCEDURE
Inspection
Details
lamp
supported by this printer is connected.
This message remains displayed until
the USB device not supported by this
printer is removed.
a memory overflow. This message
remains displayed until the OK button is
pressed.
On When Rotatesort Print is specified
under the conditions that no optional
tray is installed and also MPTray Usage
setting is something other than "Normal
Tray," Collate Copy is applied instead.
This status remains displayed until the
OK button is pressed.
On Although Rotatesort Print is specified,
Collate Copy is applied instead when
no HDD is installed.
This status remains displayed until the
OK button is pressed.
On Notifies the user that the job has been
printed in monochrome because color
printing is not allowed. (Related to
JobAccount)
This message remains displayed until
the OK button is pressed.
On Notifies the user that the job has been
cancelled because color printing is not
allowed. (Related to JobAccount)
This message remains displayed until
the OK button is pressed.
Remedial
measure
Remove
the USB
device.
Reduce
the number
of pages
that are
going to be
printed at a
time.
–
–
–
–
4-33