Oki C911 Maintenance Manual page 147

Oki Data CONFIDENTIAL
Item
Print MPTray X Adjust
Adjust
Y Adjust
Duplex X
Adjust
Duplex Y
Adjust
45530603TH Rev.2
Settings Functions
0.00 millimeter To the paper fed from MP Tray,
+0.25 Adjusts the position of a whole printing
millimeter to image (in 0.25-millimeter increments)
+2.00 perpendicular to the direction of paper
millimeter movement (i.e. horizontally).
-2.00 millimeter Print image exceeding the printable
to area is clipped by this specification.
-0.25 millimeter
0.00 millimeter To the paper fed from MP Tray,
+0.25 Adjusts the position of a whole printing
millimeter to image (in 0.25-mm increments) parallel
+2.00 to the direction of paper movement (i.e.
millimeter vertically).
-2.00 millimeter Print image exceeding the printable
to area is clipped by this specification.
-0.25 millimeter
0.00 millimeter To the paper fed from MP Tray,
+0.25 During the front-side printing of duplex
millimeter to printing (when feeding from the duplex
+2.00 unit), adjusts the location of a whole
millimeter printing image (in 0.25-millimeter
-2.00 millimeter increments) perpendicular to the
to direction of paper movement (i.e.
-0.25 millimeter horizontally).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- Duplex unit should be installed.
0.00 millimeter To the paper fed from MP Tray,
+0.25 During the front-side printing of duplex
millimeter to printing (when feeding from the duplex
+2.00 unit), adjusts the location of a whole
millimeter printing image (in 0.25-millimeter
-2.00 millimeter increments) parallel to the direction of
to paper movement (i.e. vertically).
-0.25 millimeter Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- Duplex unit should be installed.
Item Settings
Print MPTray Overprint X 0.00 millimeter
+0.25
Adjust Adjust
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Overprint Y 0.00 millimeter
Adjust +0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Tray1 X Adjust 0.00 millimeter
+0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Y Adjust 0.00 millimeter
+0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
5. MAINTENANCE MENUS
Functions
To the paper fed from MP Tray,
During the second printing of spot-color
over printing (when feeding from the
duplex unit), adjusts the location of a
whole printing image (in 0.25-millimeter
increments) perpendicular to the
direction of paper movement (i.e.
horizontally).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- C941 and Duplex unit should be
installed.
To the paper fed from MP Tray,
During the second printing of spot-color
over printing (when feeding from the
duplex unit), adjusts the location of a
whole printing image (in 0.25-millimeter
increments) parallel to the direction of
paper movement (i.e. vertically).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- C941 and Duplex unit should be
installed.
To the paper fed from Tray1,
Adjusts the position of a whole printing
image (in 0.25-millimeter increments)
perpendicular to the direction of paper
movement (i.e. horizontally).
Print image exceeding the printable
area is clipped by this specification.
To the paper fed from Tray 1,
Adjusts the position of a whole printing
image (in 0.25-millimeter increments)
parallel to the direction of paper
movement (i.e. vertically).
Print image exceeding the printable
area is clipped by this specification.
5-6