Oki C911 Maintenance Manual page 189

Oki Data CONFIDENTIAL
Table 5-8-3 Panel display when paper sensor sensitivity adjustment (WIDTH SNS ADJ
EXE) ends
Upper line of the Lower line of the display
display Details
OK / ERROR NAME WIDTH SNS ADJ RSLT Upper line:
Table 5-8-4 Errors of paper width sensitivity adjustment
Displayed error name Contents
ADJ PAPER WIDTH The result of paper width detection for correction media is out of
ERR the specified range.
The paper width of correction media detected by the normal
sensitivity (without adjustment) is not within the specified paper
width, ±16.0mm.
GUIDE MINI WIDTH The detection result at the narrowest position of the paper guide is
ERR out of the specified range.
The paper width of the paper guide detected by the normal
sensitivity (without adjustment) is not within the narrowest size,
64.0±16.0mm.
ADJUST VALUE A calculated slant adjustment or offset adjustment value is out of
ERROR the specified range.
Slant adjustment : No within ±0.02
Offset adjustment value: Not within ±16.0.
45530603TH Rev.2
Details
"OK" is displayed for the normal end.
When an error occurs, an error name is
displayed. (Refer to the Table 5-8-4)
Lower line:
"WIDTH SNS ADJ RSLT" is displayed
(Refer to the Table 5-8-5)
Table 5-8-5 PAPER WIDTH ADJ RSLT
Upper line of Lower line of Details
the display the display
ADJUST AD=***H Paper width detection result of adjustment media
PAPER W=***.*mm
AD: Sensor scanning AD value [Hex] of
WIDTH
adjustment media width
W: Value converted from a sensor reading AD
value as the mm unit.
GUIDE AD=***H Detection result of the narrowest position
MINIMUM W=***.*mm
AD: Sensor scanning AD value [Hex] at the
WIDTH
narrowest position
W: Value converted from a sensor reading AD
value as the mm unit.
SLANT *.**** Calculated slant adjustment value.When an error
ADJUST occurs, 0.0000 is displayed.
VALUE
OFFSET ***.* Calculated offset adjustment value.
ADJUST
When an error occurs, 00.0000 is displayed.
VALUE
• Results will be stored as described in memory filed.
• The contents in SRAM are deleted when the test starts, and values detected at the
normal competition or until the apparatus stops due to errors are written.
• The contents in EEPROM are updated only at the normal competition of the test.
5. MAINTENANCE MENUS
Memory
SRAM
SRAM
EEPROM
EEPROM
5-48