Oki C911 Maintenance Manual page 155

Oki Data CONFIDENTIAL
Item
Admin Others HDD Format
Setup
Setup Setup
Partition
Erase
HDD
Storage Check
File
Common
Setup System
Check
All
Sectors
Enable
initialization
Security Job
Setup Limitation
45530603TH Rev.2
Settings Functions
PCL Formats a specified partition.
Common
[Conditions for display]
PS
- When HDD is installed
- "Boot Menu"-"HDD Setup"-"Enable
HDD" is "Yes"
- "Admin Setup"-"Others Setup"-
"Storage Common Setup"-"Enable
Initialization" is "Yes".
Execute This item is displayed only when HDD
is installed.
[Conditions for display]
- When HDD is installed
- "Boot Menu"-"HDD Setup"-"Enable
HDD" is "Yes"
- "Admin Setup"-"Others Setup"-
"Storage Common Setup"-"Enable
Initialization" is "Yes".
Execute Resolves the discrepancy between the
actual (free) space of the file system
and displayed free space and recovers
the management data (FAT) information.
[Conditions for display]
- When HDD is installed
- "Boot Menu"-"HDD Setup"-"Enable
HDD" is "Yes"
Execute Recovers the sector inofmration failure
of HDD and the above file system
discrepancy.
[Conditions for display]
- When HDD is installed
- "Boot Menu"-"HDD Setup"-"Enable
HDD" is "Yes"
No Prevent the setting change in
accordance with the initialization of
Yes
BlockDevice (HDD, FLASH).
Off Job limitation mode control
Encrypted Job
[Conditions for display]
- HDD is installed and "Boot Menu"-
"HDD Setup"-"Enable HDD" is "Yes".
Item Settings
Admin Others Security Make Execute
Setup Secure
Setup Setup
HDD
Make Execute
Normal
HDD
Reset Execute
Cipher
Key
Language Execute
Language
Initialize
setup
5. MAINTENANCE MENUS
Functions
Enables the encryption function of data
stored in HDD.
Generates a cipher key and sets the
encryption function (security mode)
information to ON. In addition, initializes HDD.
[Conditions for display]
- HDD is installed, the encryption
function is disabled and [Storage
Common Setup]-[Enable Initialization]
is Yes, and "Boot Menu"-"HDD Setup"-
"Enable HDD" is "Yes".
Disables the encryption function of data
stored in HDD.
Deletes the cipher key and sets the
encryption function (security mode)
information to OFF. In addition,
initializes HDD.
[Conditions for display]
- HDD is installed, the encryption
function is enabled and [Storage
Common Setup]-[Enable Initialization]
is Yes, and "Boot Menu"-"HDD Setup"-
"Enable HDD" is "Yes".
Reproduces a cipher key used for the
encrypted HDD.
By doting this processed, data stored in
HDD cannot be recovered.
[Conditions for display]
HDD is installed, the encryption function
is enabled and [Storage Common Setup]-
[Enable Initialization] is Yes, and "Boot
Menu"-"HDD Setup"-"Enable HDD" is "Yes".
Initializes the message file installed in
FLASH.
Pressing the "OK" button shows the
following confirmation message.
Are You Sure?
Yes
No
If No is selected, the screen is returned
to the previous menu. If Yes is selected,
the device exits the menu and starts
delete processing after reboot.
5-14