Oki C911 Maintenance Manual page 74

Oki Data CONFIDENTIAL
LCD Status Message Online
Inspection
lamp
indicator
( represents a blank line.)
Varies On
Fuser Mount Signal
Warning
Varies On
Change Fuser Unit
Varies On
Non OEM Belt Unit
Detected
Varies On
Incompatible Belt
Unit
Varies On
Non Genuine Belt
Unit
Varies On
Change Belt Unit
Varies On
Change Waste
Toner Box
45530603TH Rev.2
Details
Indicates detection of an abnormal
fuser mount signal.
This warning is cleared when a normal
signal is detected at a signal check by
opening and closing the cover.
* There is no problem in continuously
using the printer with this message;
however, if the message remains
after a reset, ask the user to call the
customer service center.
Indicates that the fuser has reached the
end of its life (warning).
This status message is displayed when
the cover is opened & closed or the power
is restored after a fuser life error occurs.
Indicates detection of a belt unit that is not
optimal.
Indicates detection of a belt unit that is
not optimal.
Indicates detection of a belt unit that is
not optimal.
Indicates that the transfer belt has
reached the end of its life (warning).
This status message is displayed when
the cover is opened & closed or the
power is restored after a transfer belt
life error occurs.
When the cover is opened and closed
after the waste toner full status
notification, indicates that there is no
free space in the waste toner box.
This is just a warning, and printing does
not stop.
Remedial
LCD Status Message Online
measure indicator
( represents a blank line.)
– Varies
%COLOR% Toner
Empty
Replace
Varies
with a new
fuser unit.
%COLOR% Toner
Empty
Prompts the
user to use
an optimal
belt unit.
Prompts the
user to use
an optimal
belt unit.
Prompts the
user to use
an optimal
belt unit.
Replace
with a new
belt unit.
Replace
with a new
waster
toner box.
4. TROUBLESHOOTING PROCEDURE
Inspection
Details
lamp
On Indicates that toner has run out.
This status message (warning) is
displayed when the cover is opened &
closed or the power is restored after a
toner empty error occurs.
%COLOR%
Yellow
Magenta
Cyan
Black
White
Clear
On Indicates that toner has run out.
This message is displayed when no
print data exists with no toner.
When any of CMY toner empty error
occurs, incoming monochrome data
or monochrome & spot color data is
printed. If incoming data is color data,
Empty Error of Priority 334 occurs, and
the data cannot be printed.
When white or clear toner empty error
occurs, incoming monochrome data or
color data is printed.
If incoming data is spot color data,
Empty Error of Priority 334 occurs, and
the data cannot be printed.
In fact, a K toner empty error does not
occur. When K toner has run out, Empty
Error of Priority 334 occurs even when
there is no print data.
%COLOR%
Yellow
Magenta
Cyan
White
Clear
Remedial
measure
Replace
with a
new toner
cartridge.
Replace
with a
new toner
cartridge.
4-29