Oki C911 Maintenance Manual page 150

Hide thumbs Also See for C911:
Table of Contents

Advertisement

Oki Data CONFIDENTIAL
Item
Print
Tray4
X Adjust
Adjust
Y Adjust
Duplex X
Adjust
Duplex Y
Adjust
45530603TH Rev.2
Settings
Functions
0.00 millimeter
To the paper fed from Tray 4,
+0.25
Adjusts the position of a whole printing
millimeter to
image (in 0.25-millimeter increments)
+2.00
perpendicular to the direction of paper
millimeter
movement (i.e. horizontally).
-2.00 millimeter
Print image exceeding the printable
to
area is clipped by this specification.
-0.25 millimeter
[Display Conditions]
- Tray 4 should be installed.
0.00 millimeter
To the paper fed from Tray 4,
+0.25
Adjusts the position of a whole printing
millimeter to
image (in 0.25-millimeter increments)
+2.00
parallel to the direction of paper
millimeter
movement (i.e. vertically).
-2.00 millimeter
Print image exceeding the printable
to
area is clipped by this specification.
-0.25 millimeter
[Display Conditions]
- Tray 4 should be installed.
0.00 millimeter
To the paper fed from Tray 4,
+0.25
During the front-side printing of duplex
millimeter to
printing (when feeding from the duplex
+2.00
unit), adjusts the location of a whole
millimeter
printing image (in 0.25-millimeter
-2.00 millimeter
increments) perpendicular to the
to
direction of paper movement (i.e.
-0.25 millimeter
horizontally).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- Tray 4 and Duplex unit should be installed.
0.00 millimeter
To the paper fed from Tray 4,
+0.25
During the front-side printing of duplex
millimeter to
printing (when feeding from the duplex
+2.00
unit), adjusts the location of a whole
millimeter
printing image (in 0.25-millimeter
-2.00 millimeter
increments) parallel to the direction of
to
paper movement (i.e. vertically).
-0.25 millimeter
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- Tray 4 and Duplex unit should be installed.
Item
Settings
Print
Tray4
Overprint X
0.00 millimeter
Adjust
+0.25
Adjust
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Overprint Y
0.00 millimeter
Adjust
+0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Tray5
X Adjust
0.00 millimeter
+0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Y Adjust
0.00 millimeter
+0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
5. MAINTENANCE MENUS
Functions
To the paper fed from Tray 4,
During the second printing of spot-color
over printing (when feeding from the
duplex unit), adjusts the location of a
whole printing image (in 0.25-millimeter
increments) perpendicular to the direction
of paper movement (i.e. horizontally).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- C941 and Tray 4 and Duplex unit should
be installed.
To the paper fed from Tray 4,
During the second printing of spot-color
over printing (when feeding from the
duplex unit), adjusts the location of a
whole printing image (in 0.25-millimeter
increments) parallel to the direction of
paper movement (i.e. vertically).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- C941 and Tray 4 and Duplex unit should
be installed.
To the paper fed from Tray 5,
Adjusts the position of a whole printing
image (in 0.25-millimeter increments)
perpendicular to the direction of paper
movement (i.e. horizontally).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- Tray 5 should be installed.
To the paper fed from Tray 5,
Adjusts the position of a whole printing
image (in 0.25-millimeter increments)
parallel to the direction of paper
movement (i.e. vertically).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- Tray 5 should be installed.
5-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

C931C941

Table of Contents