Oki C911 Maintenance Manual page 29

Oki Data CONFIDENTIAL
Counter specifications
Total page
count
Description Total number
of prints
Count method: Count up
A4-basis or size after passing
independence the IN3
sensor
Operation when Printed pages are not counted when a paper feed (hopping) jam or a feed jam (code 380) occurs.
paper has jammed Printed pages are counted when any jam except the said jams occurs.
Since the total number of prints is counted up when the front end of print media passes the writing sensor, a
feed jam (code 380) is also included into the limits for counted according to its jam type.
Operation for Front/back
Duplex count
(+2)
Reset condition
Value storage PU
destination
Menu / MenuMap
output
Engine MenuMap
output
*1 The count is updated every four pages or at the completion of the printing job, but the count is not updated if the power is turned off when printing any page of page 1 to 3 of a printing job
having more than four pages.
*2 Engine MenuMap outputs Engine Menu Print (the first page) and Engine EEPROM Dump Print (the last page), and the number of sheets of paper fed from each tray is described only in the
latter one (Dump display only).
45530603TH Rev.2
MPT page Tray 1 page Tray 2 page
count count count
Number of Number of Number of
print media print media print media
hopped from hopped from hopped from
MPT Tray 1 Tray 2
Count up if Count up Count up
MPF (MPT) if Tray 1 if Tray 2
hopping hopping hopping
is finished is finished is finished
successfully successfully successfully
Only front count (+1)
None
PU PU PU
(*2) (*2) (*2)
Tray 3 page Tray 4 page Tray 5 page
count count count
Number of Number of Number of
print media print media print media
hopped from hopped from hopped from
Tray 3 Tray 4 Tray 5
Count up Count up Count up
if Tray 3 if Tray 4 if Tray 5
hopping hopping hopping
is finished is finished is finished
successfully successfully successfully
PU PU PU
(*2) (*2) (*2)
2. DESCRIPTION OF OPERATION
Monochrome
Color page count
page count
Total number of color prints Total number of
monochrome prints
The number of print media The number of print
passing the fuser in color media passing the fuser
mode is counted up when in monochrome mode is
each job is finished. (*1) counted up when each job
The value is counted on an is finished. (*1)
A4/Letter basis. Refer to Printing speed for color
A4/Letter conversion table mode may be applied to
(on the next page). monochrome mode. The
value is counted on an A4/
Letter basis. Refer to A4/
Letter conversion table (on
the next page).
Printed pages are not counted if paper jams before
passing the fuser. They are counted if prints jam after
passing the fuser.
The count increases by two.
If a color page and a monochrome page exist in a pair of
two pages, the color page count increases by one and
the monochrome page count increases by one. If color
pages exist in a pair of two pages, the color page count
increases by two. If monochrome pages exist in a pair of
two pages, the monochrome page count increases by two.
None
CU
-
CU
-
2-14