Control Multiplexer Mode Display
1.
2.
3.
Tip
Note
4.
5.
Tip
6.
________________________________________________________________________________________________________
Document 900.0803 Rev 7
02/29
Click TV Out on the Live View screen.
Click Multiplexer.
To change the camera that is displayed on the monitor, click the desired camera
number in the row that the monitor is connected to.
Port 1 is the top port on the TV Out card.
Only Ports 1 and 2 can be configured in multiplexer mode. Channel 3 will mimic
channel 1, and channel 4 will mimic channel 2.
Click the desired screen division to display in multiplex mode.
Click the Sequence button to start sequencing through cameras.
When in Multiplexer mode, the display can only sequence through one type of
screen division (eg. 4 Channel divisions A – D or 9 Channel divisions A and B on
a 16 channel Fusion).
To close the TV Out controls, click the Close button.
Fusion III DVR User Guide
Sequence Button
39