Table of Contents
Advertisement
Included Software Setup
FVMS Overview
Configuring the Server for Remote Connection
Connecting to a DVR
________________________________________________________________________________________________________
138
FVMS software is Multi-Site Management Software; a powerful utility that allows 100 or
more DVRs to be controlled using one computer. This software allows you to view live
video, search saved video, edit and configure setup on each DVR, and import maps of
buildings and other locations.
The FVMS software was specifically designed as an Enterprise software solution.
Highlights:
•
View Live Video from most computers
•
Username and Password protected
•
Easy to use graphical interface
Basics:
In order to log in to the DVR server, a user account must be made for each user. This
ensures that only authorized personnel are allowed to log in. In addition, each user
can be assigned different privileges that allow them or deny them access to different
functions.
1.
Enter Setup on the DVR.
2.
Click the Network tab.
Clear the Disable Remote Control check box.
3.
Note
If you are using a Firewall, it may be necessary to adjust the port settings on
both the DVR and the Firewall. Contact the Network Administrator for more
information.
4.
Click OK.
Make sure a User account is created. Without a user account, the Administrator
5.
account must be used.
The DVR server is now ready to receive incoming connections.
6.
Refer to the Setup section of the FVMS Manual for information on using the FVMS
Software. The FVMS Manual can be found on the Fusion Software CD.
Document 900.0803 Rev 7
02/29
Advertisement
Table of Contents
