Table of Contents
Advertisement
________________________________________________________________________________________________________
Document 900.0803 Rev 7
02/29
Steps 1-8:
Schedule cameras 1 and 2 to be activated on Sensor # 3 and/or
Sensor #5 which will then activate Relay Output #7 and #13.
Select Sch01 from the Schedule Number drop down list.
1.
(This should already be selected by default.)
2.
Select the Single Day Selection button, then select Yes.
Place a check in the boxes for SUN, MON, TUE, WED, THU, FRI, and SAT days of
3.
the week.
4.
On the Sch01 line (time selector grid), highlight the hours 00-23 and click Set.
5.
Click Camera buttons #1 and #2 until the Red Sensor buttons are selected.
Click Sensor buttons #3 and #5.
6.
7.
Click Relay buttons #7 and #13.
8.
Click Apply to save.
Fusion III DVR User Guide
51
Advertisement
Table of Contents
