Table of Contents
Advertisement
Set up Honeywell Video Analytics Communication
________________________________________________________________________________________________________
Document 900.0803 Rev 7
02/29
1.
Click the Setup button on the Live View screen.
Click the General tab.
2.
Click the Video Analysis button.
3.
4.
Select VAAgent Setup from the Protocol list and then click Setup.
Click the Communication tab.
5.
6.
Select POS ID 1 from the POS ID list and then click Add.
Tip
If other software is utilizing POS ID 1, select the next available POS ID
number.
Under Remote Info enter:
7.
Remote IP: 127.0.0.1
Remote Port: 18081
Select the Match Workstation ID check box.
8.
9.
Enter the appropriate workstation ID.
Tip
The workstation ID should match the video channel that Honeywell Video
Analytics is running on.
10. Enter the User and Password login credentials.
Default login:
User:
admin
Password:
fusionae
11. Click OK to return to the Video Analysis Setup window.
12. Select the channel that Honeywell Video Analytics is running on from the Channel
list.
Fusion III DVR User Guide
117
Advertisement
Table of Contents
