Setting Up The Fusion Remote Software; Creating A New Remote Connection - Honeywell FUSION III DVR User Manual

Setting up the Fusion Remote Software

Creating a New Remote Connection

________________________________________________________________________________________________________
Document 900.0803 Rev 7
02/29
DVR Site List
Selected Site
Information
Select Start > Programs > Fusion > Fusion Remote.
1.
2. Click New to open the Site Info window.
Enter the Site Code and Site Name. The Site Code can be found on the
3.
Information tab on the Fusion DVR.
4. Enter the IP Address of the DVR server. By default the DVR is set to connect using
DHCP.
5. Enter the Center Port. This setting is specified on the server on the Network tab
Click OK.
6.
7. Click on the newly created connection and enter the username and password.
Click Connect.
8.
Import/Export saved configurations
Fusion III DVR User Guide
137