Setup Options
Connecting a Network Device
________________________________________________________________________________________________________
32
Open Camera Setup. Setup > Camera Setup.
1.
2.
Select the camera channel to add a Network Device to.
Select the Use Network Device check box.
3.
4.
If the Network Device supports PTZ, select the Enable Network Device PTZ check
box.
5.
Click Setup Network Device and the Network Device Properties Window will
appear.
6.
Click Setup to add a Network Device.
Select the Manufacturer (Class) and Model of camera being added and click Next.
7.
Enter the IP Address, Port, ID, and Password of the Network Device and click
8.
Finish.
Document 900.0803 Rev 7
02/29