Table of Contents
Advertisement
Clip Screen Overview
Performing a Clip Backup
________________________________________________________________________________________________________
Document 900.0803 Rev 7
02/29
The Clip Screen is used for backing up video recorded by individual cameras for a
selected period of time to a specified storage location.
1.
Click the Backup button on the Main Display Screen.
2.
Click the Clip Backup tab at the top of the Backup Center window.
Set the Backup Time and End Time of the video to backup in the Time Setup box.
3.
4.
Select the Cameras to back up in the Channel Selection box.
Select the Backup Drive to save the backup video to.
5.
6.
Check the Include Viewer Check box to include the Proprietary Viewer
application.
7.
Enter pertinent clip information into the Clip Information section under
Description.
Click the Start Backup button to begin the backup process. A progress bar will
8.
display in the lower right corner of the main screen.
Fusion III DVR User Guide
103
Advertisement
Table of Contents
