Advertisement
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Snap the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure A)
2
Slide the aftermarket radio into the
cage and secure. (Figure B)
Continue to final assembly.
Programming:
In order to adjust the 99-7864 to
the different types of radios
available in the Honda Accord,
the 99-7864 has a program fea-
ture.
4 DOOR SEDAN ONLY:
To program the kit you will need
to start your vehicle then hold
the A/C button for approximately
5 seconds or until the light starts
to blink.The climate controls will
be programmed when the light
stops blinking.
2 DOOR COUPE ONLY:
To program the kit you will need
to start your vehicle then hold
the Rear Defrost button for
approximately 5 seconds or until
the light starts to blink.
The climate controls will be
programmed when the light
stops blinking.
99-7864 KIT ASSEMBL Y
DIN RADIO PROVISION
A
B
Note:
The orange wire coming out of
the back of the 99-7864 needs to
be connected to the orange illu-
mination wire coming from the
Metra 70-1721 wire harness (sold
separately).
3
Advertisement
